KLNCIT, madurai
KLNCIT, madurai KLNCIT, madurai KLNCIT email
Aboutus KLNCIT, madurai KLNCIT, madurai Admission KLNCIT, madurai KLNCIT, madurai Departments KLNCIT, madurai KLNCIT, madurai Facilities KLNCIT, madurai KLNCIT, madurai Associations KLNCIT, madurai KLNCIT, madurai Club KLNCIT, madurai KLNCIT, madurai Member KLNCIT, madurai KLNCIT, madurai Students KLNCIT, madurai KLNCIT, madurai Placements KLNCIT, madurai
 
  :: KLNCIT Principal
Dr.M. Sachithanandam
 
  :: Page Overview
Our Principal
Educational Qualification
Experience
Other Major Designations
Co-Curricular Activities
Training & Courses
Academic Achievements
Papers Published
 
 
 :: Principal Profile

 
:: OUR PRINCIPAL Details
Name Dr.M. Sachithanandam
Address Block No. 200, First Floor,
Vaigai Colony,
Anna Nagar,
Madurai - 20.
Date of Birth 05.06.1942

:: Educational Qualification
No. Qualifications Institution / University Year of Study Class / Grade
1 B.E. (Mechanical ) P.S.G. College of Technology,
Coimbatore / Madras University 		July 1960 - Jan 1965 First Class
2 M.Tech.
(Mechine Tool Design )		 Indian Institute of Technology, Bombay July 1966 - May 1968 Not Specified
3 Ph.D. (Producation Engg. ) Indian Institute of Technology, Madras July 1978 - May 1981 Not Specified

:: EXPERIENCE
No. Post Held Employer Year of Experience
1 Senior Research Assistant Indian Institute of Technology, Bombay 1965 - 1966
2 Technical Teachers Trainee,
Government of India 		Indian Institute of Technology, Bombay 1966 - 1969
3 Lecturer in Mechanical Engineering Regional Engineering College, Tiruchirappalli 1969 - 1983
4 Assistant Professor in Mechanical Engineering / Production Engineering Regional Engineering College, Tiruchirappalli 1983 - 1992
5 Professor in Producation Engineering Regional Engineering College, Tiruchirappalli 1992 - 2000
6 Principal K.L.N. College of Information Teachnology,
Pottapalayam - 630 611,
Sivagangai District.		 September 2001 onwards

:: OTHER MAJOR DESIGNATIONS
No. Post Held Employer Duration
1 Member of Board of Governors Regional Engineering College, Tiruchirappalli 1983 - 1984

2

 Head of the Department Producation Engineering July 1992 - October 1996
April 1997 - Octobor 1997 and
August 2001

3

 Head of the Department Producation Engineering & Management Studies October 1997 - April 2000

4

 Principal K.L.N. College of Information Technology September 2001 onwards


:: OTHER CO-CURRICULAR ACTIVITIES AT REC, TIRUCHIRAPALLI

  • Warden of Boy's Hostel
  • Staff Advisor, Student Chapter, Institution of Engineers (India)
  • Secretary , Officer's club.
  • Chairman, Welfare Committee



:: TRAINING AND COURSES ATTENDED ABROAD & INDIA

  • Had 16 - months training in Czechoslovakia under UNESCO Fellowship during January 1972 - May 1973
  • Attended UNESCO Seminar at Italy during September 1972
  • Visited EMCO Factory at Austria for CNC training from 26th September to 30th September 1999
    & for finalizing to set-up Nodel Training Centre at REC, Tiruchirappalli - 620 015.
  • Visited Malaysia 15th August to 18th August 2000 to present two papers in the second International
    Conference on Advance Manufacturing Technology conducted by UTM, Malaysia.
  • Attended Asian Academy seminar on Advance Manufacturing System, Hyderabad, India, December 3 -12-2000
  • Attended a number of short term courses under UGC abd AICTE schemes
Back to Top  

:: ACADEMIC ACHIEVEMENTS
Ph. D. Guided
1 One Ph. D. on "Modeling Simulation and Analysis of Robot Manipulators " completed in July 1996.
One Ph. D. on " Optimization of Facility Layout , Modeling and Simulation and Analysis of
Flexible Manufacturing system" completed in September 1998.
One Ph. D. on "Optimization of operating parameters using conventional and
Non-conventional (Genetic Algorithm ) techniques for CNC Manufacturing System completed in March 2001.
One Ph. D. on "Cell Information in FMS System " in the stage of completed in 2001.
One Ph. D. on " Optimization of Gearbox Design" Completed in October 2008.
Guided nearly 25 M.E. Projects.
Guided nearly 75 M.E. Projects.
2 Prepared 3 self instruction modules on CNC for Polytechnics students of Madyapradesh.
3 45 papers are presented or accepted for presentation in National / International conference - listed enclosed.
4 As staff and Head of the Department, involved in framing curriculum structure and syllabus
for the following program.
B.E. (Mechanical Engineering )
B.E. (Production Engineering )
M.E. (Manufacturing Engineering )
M.E. (Industrial Engineering )
MBA and
B.E. (Industrial and System Engineering )
5 Submitted fund - Proposals to Government of India, UGC and AICTE sanction to the tune of
Rs.1. Crore had been obtained for the followed Laboratory Development and R & D Projects
Engineering of multi - span bridge.
CNC Machines Laboratories.
Computer Graphics and Laboratory.
Centre of Excellence equipment.
Flexible manufacturing layout optimization.
6 Conducted periodical CNC and CAD / CAM training courses for employees of industries and institutes since 1992.
7 Conducted yearly students Symposium since 1992.
8 Carried out consultancy works on product machining using CNC machines since 1992.
9 Had been a member and / or Chairman of examination boards.
10 Had been a member of board of studies of various Universities.
Back to Top  

:: PAPERS PUBLISHED / PRESENTED IN NATIONAL AND INTERNATIONAL CONFERENCES

  • " Pneumatic method of Tool life measurement " proc. 2nd Conf., Bangalore, 1968.
  • " Tool life Criterion for coated Tools " Proceedings of 3rd ISME Conferences, New Delhi, 1980, pp. 197-200
  • " A discussion on Tool life Criteria and Total Failure Causes " , Annals of CIRP, 29/1/,1980,pp.19-22.
  • " A study on Tool wear and failure mechanisms in cutting tools", Proceedings of the first International
    Conference on Production Engineering, Cairo, 1980
  • "Tool life criteria for Coated Tools" , Proceedings of Israel Conference on Production Engineering, 1980
  • "Performance studies on a new Tool - TiC coated titanium carbide " , Proceedings of ninth AIMTDR
    Conference, IIT, Kanpur, 1980, pp.188-192
  • " Studies on TiC coated solid TiC" , VIII CVD Conference, Paris, September 1981.
  • " Cutting Tool Materials and qualities of their Structures" , Institute of Engineers(I) Bulletin, Vol.3.1, No. 8, April 1982.
  • "Tool Material aspects for improved productivity", proceed, Seminar on Productivity, 1982.
  • " Numerical Control Applications in Welding " , Proceedings of Seminar on Welding fabrication
    and Inspection Techniques held on 6th and 7th January, 1984 at REC, Tiruchirappalli.
  • " Simulation of Robot Manipulator based on kinematic analysis ", International Conference
    of Design Automation and CIM, Coimbatore, January 1991.
  • " Optimizing Robot path through graphical simulation", National Symposium on Optimization
    Techniques and Applications, Madurai, July 1992.
  • "Geometric Modeling and Simulation of Robot Manipulators", International Symposium on
    Intelligent Robotics, Bangalore, January 1993.
  • " Graphical simulation of Articulated Dual Arm Robot", Eighth national convention of Production
    Engineers, Allahabad, July ' 93.
  • " Simulation and Analysis of Six Axis Robot Manipulator" , International Conference on CAD,
    CAM, Robotics and Autonomous Factories, New Delhi, December 1993.
  • "Computer Graphics Simulation Systems for Rhino XR - 3 Robot", Tenth National Convention of
    Mechanical Engineers, Hyderabad, November 1994.
  • Simulation and Manufacturing Systems" at National Conference on CAD / CAM , PSG College of
    Technology, Coimbatore, August 1994, pp.M.2.1 - 2.2
  • " Geometric Modeling and Simulation of Robot Manipulators" , paper published in the journal of
    National Design & Research Forum. Institution of Engineers (INDIA) on "Robotics" April - June 1995. Vol.xxvi.No.2
  • " An Interactive Computer Modeling and Simulation for the evaluation of manufacturing
    Conference on intelligent Robotics System, Nov'95, Bangalore, pp.524-528.
  • " Development of and algorithm for controlling AGV in Flexible Manufacturing System" at
    International Conference on CAD, CAM, Automation, Robotics and Factories of Future, Jan '96, New Delhi, pp.159-165.
  • " Manufacturing Automation through Reverse Engineering using Vision System" National
    Seminar on Computer Aided Inspection and Advanced Metrology, Madras, Feb ' 96.
  • " Computer Simulation - A tool for planning and Design of Flexible Manufacturing System",
    the journal of Manufacturing Technology and Management, Indian Institute of Production Enginers, Bangalore, Oct ' 97.
  • " Optimization of FMS layout using Genetic Algorithm " Proceedings of XII National convention
    of Production Engineers, Institution of Engineers, Oct'97, Jabalpur.
  • " Analysis of FMS Simulation software using ANOVA", National Conference on Intelligent
    Manufacturing Systems, Coimbatore, Feb'98, pp.13.1 - 3.4.
  • " A combined approach for layout optimization using Genetic Algorithm and Simulation",
    National conference on intelligent Manufacturing Systems, Coimbatore, Feb ' 98, J 4.1 - 4.8
  • " Computer simulation - An aid for class room instruction on FMS", Advanced simulation Technologies
    International conference ' 98, the Society for Computer Simulation International, Boston, Massachusetts, April 1998.
  • " Optimization of FMS facility layout using Genetic Algorithm " , Industrial Engineering Journal Mumbai,
    Vol.XXVII, No. 9, pp12-19, September 1998.
  • " A Comparative study of facility layout in FMS using GA under varying genetic operators " , AIMTDR
    conference at IIT Kharagpur in December, 1998, pp555-560.
  • " Optimization of CNC turning operation using Boundary search procedure and Dynamic programming
    " National conference on Automation in Manufacturing , Institution of Engineers, Jabalpur, Oct.18 -19, 1997.
  • " Genetic Algorithm (GA) for optimization of CNC turning operators (Multi - pass turning )", National
    Conference on automation in Manufacturing, Institution of Engineers, Jabalpur, Oct. 18-19, 1997.
  • " Optimization of Face - milling operation using Genetic Algorithm (GA)" , National Conference on
    Intelligent Manufacturing Systems, CIT, Coimbatore, Feb. 6-7-1998.
  • " optimum scheduled tool replacement for CNC turning centers " , thirteenth National Convention
    of Production Engineers, Institution of Engineers, Tiruchirappalli, Oct.12 - 13, 1998.
  • " Multistage machining optimization for cellular manufacturing system", 14 th International Conference
    on CAD / CAM, Robotics and Factories of the future, PSG College of Technology, Coimbatore, Dec.1-3, 1998.
  • " Selection of operating parameters in surface grinding process using Genetic Algorithm (GA ) ,
    18th All India Manufacturing Technology Design and Research conference IIT, Kharagpur, Dec.21-23, 1998.
  • " Optimization of CNC machining operation subject to constrains using Genetic Algorithm (GA)",
    International Conference on Intelligent Flexible Autonomous Manufacturing System, CIT, Coimbatore, January 2000.
  • " Optimization of operating parameters using conventional and non-conventional ( Genetic Algorithm )
    techniques for CNC machining process" , 16th international conference on CAD / CAM, Robotics
    and factories of the future, Universities of West Indies, July 2000 (Accepted for presentation )
  • " Concept of closeness of vertices in the model of minimum spanning Tree applied for machine - cell
    formation" , Proceedings of second International Conference on Advance Manufacturing Technology,
    Joher Bahru, Malaysia, 16th & 17th August, 2000
  • " Practical Gear Design Optimization using Genetic Algorithm and Simulated Annealing Algorithm"
    proceedings of second International Conference on Advance Manufacturing Technology, Joher
    Bahru, Malaysia, 16 th & 17th August, 2000
  • Gear Box Design Optimization using Genetic Algorithm and simulated Annealing Algorithm paper
    accepted for presentation at national seminar on Advance in Integrated Manufacturing system,
    Anna University, Chennai, Feb.2001.
  • Gear Design Optimization using Genetic Algorithm and simulated Annealing Algorithm", Proceedings
    of the Second International Conference on Advanced Manufacturing Technology (ICMAT - 2000), University Teknologi, Malaysia, August 16 - 17, 2000, pp 177 -183.
  • Gear Box Optimization using Genetic Algorithm and simulated Annealing Algorithm. Proceedings of
    National Seminar on Advances in Integrated Manufacturing Systems, Department of Production
    Technology, MIT, Anna University, Chennai, Feb.2-3, 2001, pp 171-179.
  • Gear Box Design Optimization using Genetic Algorithm " , Proceedings of the National Symposium,
    Manufacturing Engineering in Twenty First Century, Department of Mechanical Engineering, IIT Kanpur,
    March 23,2001, pp 7-11.
  • " Gear Box Design Optimization using simulated Annealing Algorithm " , All India Seminar on
    Manufacturing Strategies for 21st Century ( PINNACLE 2003 ) , Organized by Department of Production
    Engineering , Govt. College of Engineering , Thrissur, in association with AICTE & Institution of
    Engineers (I), November 26-28, 2003..
  • " Gear Box Design Optimization using Simulated Annealing Algorithm " , Proceedings of National
    Conference on Recent Trends in Manufacturing Modeling and Analysis (MMA 2004) , Organized
    by St. Joseph's College of Engineering, Chennai, India, Feb 3 , 2004, pp 1-6.

 

:: PAPERS ACCEPTED FOR PUBLICATION IN THE INTERNATIONAL JOURNALS

  • "Genetic Algorithm (GA) for multi - variable Surface Grinding Process Optimization using Multi- Objective function model" , International Journal of Advanced Manufacturing Technology, United Kingdom.
  • Comparative Analysis of conventional and Non - conventional optimization techniques for the CNC turning
    process" , International Journal of Advanced Manufacturing Technology, United Kingdom.
:: COMMUNICATED PAPER TO INTERNATIONAL JOURNALS
" Multi - Objective Surface Grinding Process optimization using Genetic Algorithm (GA)', International Journal of Production Research.
 
  Home  |  Photo Gallery  | Downloads  |  Site Map  |  Links | Contact Us |  Feedback |   Bookmark Us

Copyright 2009. KLNCIT. All rights reserved.
Site is designed, developed & maintained by , KLNCIT
Back to Top